[cisco-voip] CM 6.0 unable to Cfwdall

[Jonathan Charles]

Better to block it in the first place... I would much rather have
people whine they couldn't make a call, then have some CIO yelling at
me cuz I allowed the call...

Then again, we make this as part of the design meetings... with
appropriate 'the sky is falling' warnings...

Jonathan

On 10/16/07, Matt Slaga (US) <Matt.Slaga at us.didata.com> wrote:
> That is why departmental bill-back is such a great thing.  Managers that
> see this type of expense will squash it quicker than any IT guy could!
>
> -----Original Message-----
> From: Jonathan Charles [mailto:jonvoip at gmail.com]
> Sent: Tuesday, October 16, 2007 1:17 PM
> To: Matt Slaga (US)
> Cc: James Grace; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] CM 6.0 unable to Cfwdall
>
> Well, yes, it is most likely a CSS issue for CFA...
>
> However, before changing the CFA CSS to LD or whatever, make sure you
> want to let people do that, because there is a great potential for
> toll fraud.
>
> For example, employee has CFA CSS set to everywhere.
>
> He CFA's his phone to Maddrass, goes home and calls his desk phone to
> talk to his parents in India... he paid for a local call, you paid for
> a call to India.
>
> I would recommend that you create a CFA CSS to include just Voicemail
> and local calling.
>
> Maybe include your local area codes (so people can CFA to their
> cells), but don't go crazy until you are sure you want to.
>
>
> Jonathan
>
> On 10/16/07, Matt Slaga (US) <Matt.Slaga at us.didata.com> wrote:
> >
> >
> >
> >
> > Check your CFA CSS.
> >
> >
> >
> >
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
> > James Grace
> >  Sent: Tuesday, October 16, 2007 9:41 AM
> >  To: cisco-voip at puck.nether.net
> >  Subject: [cisco-voip] CM 6.0 unable to Cfwdall
> >
> >
> >
> >
> > ?
> >
> >
> >
> > for some reason im not able to hit the  Cfwdall button in CM 6.0.  I
> can
> > dial any pattern i want to, but when i press cfwdall its not allowing
> any
> > digits.  It give me "your call can not be completed.  Never ran into
> this on
> > previous ver.
> >
> >
> >
> >
> >
> >
> >
> > James Grace
> >
> >
> >
> >
> >
> > Systems Engineer
> >
> >
> > Adcap Network Systems, Inc.
> >
> >
> > 6865 Shiloh Road East, Suite 250
> >
> >
> > Alpharetta, GA 30005
> >
> >
> >
> >
> >
> > office: 678-456-6986
> >
> >
> > direct: 678-456-6761
> >
> >
> > jgrace at adcapnet.com
> >
> >
> > www.adcapnet.com Disclaimer For ADCAP Network Systems
> >
> > "The information transmitted is intended only for the person or entity
> to
> > which it is addressed and may
> > contain confidential and/or privileged material. Any review,
> retransmission,
> > dissemination or other use of,
> > or taking of any action in reliance upon this information by persons
> or
> > entities other than the intended
> > recipient is prohibited. If you received this message in error, please
> > contact the sender and delete the
> > material from all computers."
> >
> > This original email was sent to the internet for delivery at 16 Oct
> 2007
> > 09:39:53 -0400
> >
> >
> >
> > ________________________________
> >
> >
> >
> >
> >  Disclaimer: This e-mail communication and any attachments may contain
> > confidential and privileged information and is for use by the
> designated
> > addressee(s) named above only. If you are not the intended addressee,
> you
> > are hereby notified that you have received this communication in error
> and
> > that any use or reproduction of this email or its contents is strictly
> > prohibited and may be unlawful. If you have received this
> communication in
> > error, please notify us immediately by replying to this message and
> deleting
> > it from your computer. Thank you.
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
> -----------------------------------------
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only.  If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
>