[cisco-voip] Extended Services for CCM 4.3????

[Jonathan Charles]

Someone suggested using the AAR file to create everything does that work?

Also, are the apps and prompts built automagically? Or do I have to
hunt em down...

Also Also, where is this install guide you speak of that says how to
do it on an IPCC cluster?


Jonathan

On 10/16/07, Justin Steinberg <jsteinberg at gmail.com> wrote:
> haven't done 4.3
>
> but with 4.1, you install TAPS from the ccmadmin plugin page on the
> CCM publisher, and then run the same install (taps from ccmadmin
> plugins) on the IPCCX master box.
>
> it's pretty easy.  taps install guide is straightforward.
>
>
> On 10/16/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> > OK, more questions...
> >
> > I know this is going to sound shocking, but I have never used TAPS
> > before (yes, I have been doing this since 2004, and I have never set
> > up TAPS... sue me).
> >
> > I have two CCM 4.3(1) boxes and two IPCC 4.1(1) servers in an HA cluster.
> >
> > Can I use the IPCC cluster for TAPS and just load the aar file onto
> > it? It seems too easy, but it sounds like a plan...
> >
> > Or, MUST I install IPCC on my CCM Publisher and then run TAPS there?
> >
> > Any ideas....
> >
> >
> >
> > Jonathan
> >
> > On 10/16/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > It does not appear to have shipped with it, nor is it on CCO... I am
> > > trying to setup TAPS... any ideas?
> > >
> > >
> > >
> > > Jonathan
> > >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>