[cisco-voip] Question on automating the Phone Services subscription process

[Michael Thompson]

I'm going to base my comment off of assuming that you're talking about CCM
4.X and not 6 (which is the latest).  if BAT is installed, i'm pretty sure
you can select all the phones after they are auto-registered and assign a
service to them at that point.

On 10/16/07, Ian Yap (iayap) <iayap at cisco.com> wrote:
>
>  Hi there everyone
>
> I was wondering if there is a way to automate this process. I am using a
> few phone services developed under CUAE inside the latest CUCM( i.e. I
> added the services under Device --> Device Settings --> Phone Services ). I
> also have auto-registration enabled, therefore, when I register a Cisco IP
> phone with my CUCM, it will be assigned an extension immediately. However, I
> would need to go to every phone manually (Device --> Phone) each time to
> subscribe it to those phone services I mentioned earlier.
>
> I couldn't find a way to define some form of a template that every newly
> registered phone could use to automatically subscribe to the services I
> wanted. Is there a workaround solution?
>
> Thanks
> Ian
>
> "You can make more friends in two months by becoming really interested in
> other people than you can in two years by trying to get other people
> interested in you."  --- Dale Carnegie
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071016/b63f9d39/attachment-0001.html