[cisco-voip] OT: Creating your own site to site PRI's?

[Lelio Fulgenzi]

T1 extenders. We use them and have been happy with them. If it's your fibre, 
that's what I would do.

Something like this should do:

http://www.rad.com/Article/0,6583,33171-E1_T1_Optical_Line_Multiplexers,00.html


you can send up to four T1s over a fibre pair with this.


----- Original Message ----- 
From: "Dark Fiber" <d4rkf1ber at gmail.com>
To: <cisco-voip at puck.nether.net>
Sent: Thursday, October 18, 2007 3:59 PM
Subject: [cisco-voip] OT: Creating your own site to site PRI's?


>I need to come up with a way to create my own PRI's between two
> locations.  These will have to be stand alone, PRI's not related or
> controlled by CallManager.  Its to tie a remote office PBX shelf unit
> into the main office PBX.
>
> See the call center still runs on an older PBX, we utilize CallManager
> for everything else.  The remote office will be relocating soon and
> well we have alot of fiber between the new location and the main
> office, so ideally I would prefer to come up with our own PRI solution
> rather then have to pay for and rely on BS/AT&T for PRIs.
>
> Any thoughts or suggestions?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>