[cisco-voip] cucm 6 and TAPS

[Ted Nugent]

confirmed... taps services is required for CM to talk to the taps.asp on the
CRS server

On 10/18/07, Frazee, Timothy <Timothy_Frazee at adp.com> wrote:
>
>  Group,
>
>
>
> From some of the reading I have seen, it looks like I still need an
> external CRS server for TAPS to operate in 6. I see a "TAPS Service" in the
> serviceability page.
>
>
>
> Can anyone give me a firm answer?
>
>
>
> If it truly is "all in one" then can anyone point me to a doc that shows
> how to config it?
>
>
>
> Thanks all.
>
>
>
>
>
>
>
>
>
>
>
> Timothy Frazee
>
> Network Solutions
>
> Automatic Data Processing, Inc.
>
> ------------------------------
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and confidential.
> If the reader of the message is not the intended recipient or an authorized
> representative of the intended recipient, you are hereby notified that any
> dissemination of this communication is strictly prohibited. If you have
> received this communication in error, please notify us immediately by e-mail
> and delete the message and any attachments from your system.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071018/ed1155ed/attachment.html