[cisco-voip] CCME GUI adding phones "no phone to add"

[Jonathan Charles]

The GUI is for most purposes, useless.

Granted, I don't admin CME/CUE, I just stage and deploy... so, the CLI
is where all my config is done.

You can't configure dial-peers, you can't overlay numbers... it is
really quite limited.



Jonathan

On 10/18/07, Paul Choi <asobihoudai at yahoo.com> wrote:
> Yes Jonathan, GUI-using CCME users do exist.
>
> For clarification, all major configuration was done
> through CLI. The system was handed over to the
> customer so they would be able to perform
> adds/moves/changes easily without having to get
> someone with AAA access involved.
>
> I think the GUI works pretty well for end users. I'm
> fairly satisfied with it...so long as there's no
> aaa authentication config-commands in the router.
>
> Paul
> --- Jonathan Charles <jonvoip at gmail.com> wrote:
>
> > People are actually out there configuring CCME via
> > the GUI????
> >
> > Wow.
> >
> >
> > Jonathan
> >
> > On 10/17/07, Paul Choi <asobihoudai at yahoo.com>
> > wrote:
> > > FYI, for anyone that is encountering an error
> > dialog
> > > of "no phones to add" from the CCME GUI, you have
> > to
> > > go into the box and under telephony-service mode,
> > turn
> > > auto-reg-ephone back on.
> > >
> > > hope that helps someone!
> > > Paul
> > >
> > >
> > >
> >
> ____________________________________________________________________________________
> > > Shape Yahoo! in your own image.  Join our Network
> > Research Panel today!
> >
> http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7
> > >
> > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > >
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
>
>
>
>
> ____________________________________________________________________________________
> Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more.
> http://mobile.yahoo.com/go?refer=1GNXIC
>