[cisco-voip] call manager express blocking outbound caller ID

Erik Erasmus (E) ErasmuE4 at telkom.co.za
Fri Oct 19 11:49:37 EDT 2007


thanks
 
 
souns like a good way of doing it -- will try it out

________________________________

From: Robert Kulagowski [mailto:rkulagow at gmail.com]
Sent: Fri 2007-10-19 16:23
To: Erik Erasmus (E)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] call manager express blocking outbound
caller ID



You could do this with two different route patterns (which is how we
do it)

The first route pattern on CCM, where you want to block caller ID,
would
be set for "restricted" in the route pattern on the Calling line ID
presentation.

Lets say you use "8" to get an external line.  On CCM you'd have "8.!"
(or whatever) as the route pattern

On the router (h.323 dial-peers), it would be:

dial-peer voice 1000 pots
destination-pattern 8T
clid restrict
port 0/1/0:15

The second route pattern could be "*8.!" on CCM, and on the router
you'd
have

dial-peer voice 1001 pots
destination-patter *8T
port 0/1/0:15

So in dial-peer 1001, we don't have the clid restrict command, so it
_will_ send caller ID.




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail is subject to the Telkom SA electronic communication legal notice, available at :
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071019/df314d8f/attachment-0001.html 


More information about the cisco-voip mailing list