[cisco-voip] Push IP phone service to phone

[Scott Voll]

first off..... Welcome to the Puck list!

Are you running CER downt to the room location?  Is this a policy?  Are you
going to have a ERL / ELIN per room?  seems a little over kill.  or is it
just for the response personel?

Scott


On 10/19/07, Matthew J. Hughes <mattjhughes at gmail.com> wrote:
>
> First post here, new to the group :)
>
> I am attempting to  gather the physical location of phones on campus for
> use with emergency responder.  I want the phone user to be prompted with a
> IP Phone Service on their 79xx phones, that asks them to verify their
> physical location (Room Number, Building Name)  I don't want this to be
> burdensome so I only want it to come up every time a phone reboots (It wont
> move locations unless its unplugged).   To accomplish this  I ran into these
> roadblocks
>
> 1.  IDLE URL will certainly force them to see it, but will bug them far to
> much. (although if i set the idle timer long enough it could come up only
> once a day.)
> 2. I can push messages to their screen, but don't think i can push a XML
> service.
>
> I am thinking I would have to use AXL/SOAP to add/remove idle URL,  OR
> somehow as part of the boot process force them to a XML service.
>
> any thoughts?  I am running CCM 6.0 and CER
>
> Thanks in advance,
> Matt
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071019/1a1e609c/attachment.html