[cisco-voip] MGCP FXO port and sending no digits in CCM 5.x

[Erick Bergquist]

FYI,

This issue appears to be bug CSCsi19351.

On 10/4/07, Erick Bergquist <erickbee at gmail.com> wrote:
> Is there another trick to doing this in CCM 5.x then 4.x? In 4.x I
> would set up the route pattern as say 1234. and do a PreDot digit
> strip. I tried this in CCM 5.x for a MGCP FXO port going to a paging
> system and it did not work, said unknown number and gave reorder tone
> when route pattern was 1234.  but 1234 works and connects but sends
> 1234 out port which doesn't work with the paging system.  I made it
> H323 but was wondering how to just have a FXO port go offhook and send
> no digits with MGCP in 5.x.
>