[cisco-voip] Call static

[Jonathan Charles]

One way audio is always (seriously, always) a routing problem.

The static could be occurring on a leg after the T1 is terminated at
telco or on the PRI switch itself, or on the other end of the call...





Jonathan

On 10/22/07, CarlosOrtiz at bayviewfinancial.com
<CarlosOrtiz at bayviewfinancial.com> wrote:
>
> I am getting reports from a remote site of sporadic static/one way voice on
> calls.  These calls are through a gateway that is local at the site with a
> PRI.   I tried making about 8-10 test calls and every single call was fine
> for me.  The controller T1 1/0 is clean.
>
> Total Data (last 24 hours)
>      0 Line Code Violations, 0 Path Code Violations,
>      0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
>      0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
>
>
> Anyone seen this before?
>
> Carlos
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>