[cisco-voip] how to change Span to PC Port configuration in a 7941 phone

[Ryan Ratliff]

I found that 4.2(3) with no SRs did not show the "span to PC port"  
for the 41/61 phones but did for the 7970s.  After upgrading to SR3  
it is fixed.

-Ryan

On Oct 22, 2007, at 5:00 AM, Pedro Nogueira wrote:

Hello,

i know where to change it in the web pages, my problem is that it  
dont appear in the admin conf page (CCM), neither in the
phone admin page, in the 7911 model it appears, but in the 7941 or  
7961 model, dont.
Any sugestions or ideas ?

Pedro Nogueira
Dep. Técnico
Sicnet



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip