[cisco-voip] CUBE or IP IP GW with MTP

[tele]

Hi,

Ryan yes you need turn on "telephony-services".
You can also use an external DSP farm for the MTP or transcoding.

http://www.cisco.com/en/US/products/ps6706/products_feature_guide09186a008076161a.html



:tele

On Thu, 2007-10-25 at 22:34 -0400, Ryan O'Connell wrote:
> Hello all,
> 
>  
> 
> Quick question, on IOS routers you can use DSP resources as MTP. I
> understand and implemented this many times in the past using SCCP
> commands that point back to CallManager or CallManager Express. I'm
> just wondering in the case of CUBE or IP-IP GW used as a SIP trunk to
> the Service provider, and we are not using CallManager or CallManager
> Express can I still use the DSP's for MTP's, Transcoding? In my case
> I'm specifically looking for MTP's cause I need it for FAST Start
> H.323 calls.
> 
>  
> 
> According to the attached Document there is such thing as a "HARDWARE
> based MTP" but the bullet stats that it uses SCCP
> 
> 1.    MTPs ( and Transcoders ) can be controlled by Communications
> Manager or the Cisco Unified Border Element (via SCCP)
> 
> So do they mean that I have to turn on "TELEPHONY-SERVICES" just to
> make use of these MTP or am I missing something
> 
>  
> 
> Ryan
> 
>  
> 
>  
> 
> 
> 
> ______________________________________________________________________
> Privileged/Confidential Information may be contained in this message.
> Disclosure to any person other than the named recipient is
> unauthorized.  If you are not the intended recipient, please delete
> all copies of this information and kindly notify the sender by reply
> email.  Opinions, conclusions and other information in this message
> that do not relate to the official business of UNIS LUMIN Inc. shall
> be understood as neither given nor endorsed by it.  UNIS LUMIN Inc.
> and any of its subsidiaries reserve the right to monitor all e-mail
> communications through its networks.  Thank you.
> 
> 
> ______________________________________________________________________
> 
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only. If you are not the intended
> addressee, you are hereby notified that you have received this
> communication in error and that any use or reproduction of this email
> or its contents is strictly prohibited and may be unlawful. If you
> have received this communication in error, please notify us
> immediately by replying to this message and deleting it from your
> computer. Thank you.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip