[cisco-voip] H323 dial-peers question

[Nikola Stojsin]

I have a question - I have just set up a set of H323 dial-peers with
CallManager and Unity and DID extensions. The configuration below works, but
it looks ugly to me. If someone can take a look at it and let me know  what
should be done to it. Thanks!

 

(Note: 4900 is the Unity AA pilot; CM extensions are the same as the last
four digits of the DIDs. Yes, telco sends ten digits; please do not ask me
why. 

 

voice translation-rule 10

 rule 1 /......4300/ /4900/

 rule 2 /......4301/ /4301/

 rule 3 /......4302/ /4302/

 rule 4 /......4303/ /4303/

 rule 5 /......4304/ /4304/

 rule 6 /......4305/ /4305/

 rule 7 /......4306/ /4306/

 rule 8 /......4307/ /4307/

 rule 9 /......4308/ /4308/

 rule 10 /.*/ /4900/

!

voice translation-profile To_Unity

 translate called 10

!

dial-peer voice 9 pots

 description To_PSTN 

 destination-pattern 0T

 direct-inward-dial

 port 0/1/0:23

!

dial-peer voice 4900 voip

 description PSTN_To_Unity_Translating 

 translation-profile outgoing To_Unity

 destination-pattern ......4...

 voice-class codec 1

 voice-class h323 1

 session target ipv4:192.168.57.15

 dtmf-relay h245-alphanumeric

 ip qos dscp cs3 signaling

 no vad   

 

Again, thanks in advance!

Nikola

 

 

------------------------------
Nikola Stojsin
Nikola at att.net
(917) 558-1423

(917) 591-9382 (fax)
------------------------------

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071028/a60a531b/attachment.html