[cisco-voip] How to set default PRI destination to Operator using MGCP

[Lemon]

On 10/31/07, Axel Wilzinski <axe7961 at hotmail.com> wrote:
> How can I set all unassigned DN's that come in on a PRI to a default 4 digit
> extension?  I'm going crazy trying to figure this out.  Basically, I want
> all unassigned numbers in our DID range to automatically go to our operator.

create a translation pattern. lets say your extension range is 1000 -
1499, then create a translation pattern like 1XXX and have it ring at
the operator.