[cisco-voip] Phone registration status

[Lelio Fulgenzi]

OK.

You can also set up alarms using CallManager alarms and a syslog host and 
some processing scrips.

----- Original Message ----- 
From: "Robert" <rsingleton at morsco.com>
To: <cisco-voip at puck.nether.net>
Sent: Wednesday, October 31, 2007 12:59 PM
Subject: Re: [cisco-voip] Phone registration status


> On Wed, 2007-10-31 at 11:26 -0400, Lelio Fulgenzi wrote:
>> you can also see the registration status from the callmanager web page.
>> but you probably already knew that.
>
> hehehhee Yeah... I need a non-interactive way
>
> On Wed, 2007-10-31 at 10:26 -0500, Wes Sisk wrote:
>
>> That said there are a few ways to query device registration status:
>> 1. mmfspy from the command prompt of the CM server
>> 2. SNMP looking at the device table in the CCM mib.  It gives the
>> same information as mmfspy
>> 3. http://<server>/ccmadmin/reports/DeviceListX.asp gives the same
>> information as mmfspy
>
> mmfspy - spiffy tool, very quick, but interactive. :/
>
> SNMP - will have to investigate this, but at first glance, this may be a
> good bet for what I'm doing here...
>
> DeviceListX.asp - also spiffy and I can wget the info, though it does
> not come back quickly since it gives me the status of not just one
> device but all of them. :) Takes about 7.5 seconds for 1144 lines.
>
> I have been moving all my command line tools to a web server so that
> more than just the two admins can benefit from them. In the process, I
> have combined several of them and added some functionality. Every time I
> add something cool, it makes me want more and registration status and/or
> the phone's IP is the next bit I'd like to see on the telephone info
> page :)
>
> Thanks, especially to Wes, for all the help!
>
> Robert
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>