[cisco-voip] CUCM 5.X/6.X and LDAP

MILLS, Mark mark.mills at baesystems.com
Mon Sep 3 03:09:58 EDT 2007


Hi,

I am trying to filter based on users in a specific group within AD, but
have an issue using the & operator in the ldap filter, has anyone else
successfully managed to do it?

I am trying to use an ldap filter of:

(&(objectclass=user)(!(UserAccountControl:1.2.840.113556.1.4.
803:=2))(memberOf=CN=VOIP,OU=SecurityGroups,OU=General,DC=au,DC=baesyste
ms,DC=com))

I receive the following error:

[Fatal Error] :16:47: The entity name must immediately follow the '&' in
the entity reference.
org.xml.sax.SAXParseException: The entity name must immediately follow
the '&' in the entity reference.

We can do anything with the filter as long as we don't specify the &
operator ... Anyone able to point out what I have wrong?

Cheers,
  Mark



> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
> Sent: Wednesday, 29 August 2007 4:06 AM
> To: rschuknecht at gmx.de
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] CUCM 5.X/6.X and LDAP
> 
> Robert,
> 
> Yes.  requires setting attributes in your directory and then 
> applying a 
> filter on CM. I will unicast a doc.
> 
> /Wes
> 
> rschuknecht at gmx.de wrote:
> > Hi List,
> >
> > is it possible to filter out "unwanted" LDAP Users from the 
> Callmanager End-Users, or in other words from the corporate 
> directory? 
> >
> > I have an Callmanager 5.X and 6.X, in LAB for testing, the 
> are both connected (synced) with an mircosoft AD. And i see 
> all my AD-Users. The only users which are filtered out 
> automatically are the default Mircrosoft Users.
> >
> > Any ideas? Thanks in Advance.
> >
> > Robert
> >   
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


More information about the cisco-voip mailing list