[cisco-voip] integrate single CME site with central Call manager

Erik Erasmus (E) ErasmuE4 at telkom.co.za
Tue Sep 4 08:28:12 EDT 2007


Hi 

 

I need a bit of advice. I want to integrate a single Call manager
Express site using cme 4-2 with a central call manager 4-2-3 sr2b .
The central CCM site has local pstn gateway and the cme remote site
also has local pstn gateway. All I really want to achieve is the
ability to allow people to make IP wan calls from the CME site to the
central call manager site using the 4 digit extensions of HQ and the
people at the central site to call the remote site using a 4 digit
extensions of the remote branch. The extensions are unique.

 

Don't want to make it too complicated - no ip to ip gateway and
gatekeepers available.

 

My problem is on the call manager side - what to do there. On the CME
side I think I will be OK and have an example of how to set up dial
peer to ccm side but I am not sure what to do ion the call manager 4-2
side. Do I create an H323 gateway for the cme site router - do I make
a trunk ?? 

 

Any advice will be appreciated - in terms of config on ccm side as
well as on the cme side.

 

erik erasmus



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail is subject to the Telkom SA electronic communication legal notice, available at :
http://www.telkom.co.za/TelkomEMailLegalNotice
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070904/0cb9756c/attachment.html 


More information about the cisco-voip mailing list