[cisco-voip] Inter-Tel Phones using CallManager/Unity as voicemail?

[Wes Sisk]

standard PRI will not pass MWI messages.  You have to have Q.SIG.

/Wes

On Aug 31, 2007, at 9:51 AM, Jason Aarons ((US)) wrote:

Does anyone have Inter-Tel phones hanging off callmanager via ISDN  
PRI and using Unity Voicemail Only for voicemail? Can you describe  
your setup and how it’s working?



I’m not sure if the Inter-Tel phones MWI light will work right. Maybe  
I can use stutter dial tone with Unity.



I don’t see any PBX Interoperability guides with Intertel on CCO!





Disclaimer: This e-mail communication and any attachments may contain  
confidential and privileged information and is for use by the  
designated addressee(s) named above only. If you are not the intended  
addressee, you are hereby notified that you have received this  
communication in error and that any use or reproduction of this email  
or its contents is strictly prohibited and may be unlawful. If you  
have received this communication in error, please notify us  
immediately by replying to this message and deleting it from your  
computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070904/76d75517/attachment-0001.html