[cisco-voip] Unused DN treatment

[c3voip]

You can use a translation pattern with wildcards and that should take care
of unused numbers in a block.

-C

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of STEVEN CASPER
Sent: Wednesday, September 05, 2007 9:09 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unused DN treatment

 


 In Call Manager is there any way to define a treatment such as an
announcement or routing to an attendant/Unity  for unused numbers in  DID
blocks that terminate to MGCP gateways? I could do translation patterns but
that would be a real pain to create and maintain. 

 

 

Steve Casper
Voice Technologies
M&T Bank
(410) 347-6026 

************************************
This email may contain privileged and/or confidential information that is
intended solely for the use of the addressee. If you are not the intended
recipient or entity, you are strictly prohibited from disclosing, copying,
distributing or using any of the information contained in the transmission.
If you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic or
hard copy. This communication may contain nonpublic personal information
about consumers subject to the restrictions of the Gramm-Leach-Bliley Act
and the Sarbanes-Oxley Act. You may not directly or indirectly reuse or
disclose such information for any purpose other than to provide the services
for which you are receiving the information.
There are risks associated with the use of electronic transmission. The
sender of this information does not control the method of transmittal or
service providers and assumes no duty or obligation for the security,
receipt, or third party interception of this transmission.
************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070905/588e3244/attachment.html