[cisco-voip] 3750 switchport - faulty state

[Ed Leatherman]

Hey folks,

Anyone seen this output from a 3750:

switch# show power inline
*snip*
Fa2/0/44  auto   faulty     0.0     n/a                 n/a   15.4
Fa2/0/45  auto   faulty     0.0     n/a                 n/a   15.4
Fa2/0/46  auto   faulty     0.0     Ieee PD             2     15.4
Fa2/0/47  auto   faulty     0.0     n/a                 n/a   15.4
Fa2/0/48  auto   faulty     0.0     n/a                 n/a   15.4

Switchports had a phone plugged into 2/0/44, user moved the phone to a few
different jacks and couldnt power up on any of them. I suspect that these
are the same ports that are listed as faulty. Can I assume that the ports
were bad from the start, or would an IP phone with a messed up switch or bad
cabling in the wall cause this faulty state?



-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070906/908787fb/attachment-0001.html