[cisco-voip] PRI and a half

Pat Scissons (via forward from Lelio) lelio at uoguelph.ca
Tue Sep 11 14:55:05 EDT 2007


You could always busy out the channels using the callmanager service parameters. I've heard people on the list do that. I think.

  ----- Original Message ----- 
  From: Wes Sisk 
  To: Scott Voll 
  Cc: cisco voip list 
  Sent: Tuesday, September 11, 2007 2:45 PM
  Subject: Re: [cisco-voip] PRI and a half


  Cisco IOS ISDN stack feature called NFAS.  Not available in CM with MGCP backhaul.

  /Wes

  Scott Voll wrote: 
    I'm helping out with a VoIP install.

    They currently have a PRI + half of a second PRI.  I'm running CM 5.1.2 and MGCP to the gateway.  How do I configure the 1/2 of a PRI circuit?

    Thanks

    Scott
----------------------------------------------------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070911/9a49e1a4/attachment.html 


More information about the cisco-voip mailing list