[cisco-voip] Locking Shift to Codeset 4

Scott Voll svoll.voip at gmail.com
Thu Sep 13 11:00:02 EDT 2007


Add Tadiran to the Avaya / Nortel list.

I'm trying to get the Tadiran PBX talking with CM 5.1.2 mgcp 3845 pri qsig
(that's a mouth full)

and I'm also seeing what should be 9+ number come up in the Q931s as
101101+number.  Is this an issue on my side (CM) or the PBX (Tadiran)?

PSTN --> CM --> PBX works just fine.

it's the PBX --> CM --> PSTN that's not working so fine.

Scott


On 9/13/07, Wes Sisk <wsisk at cisco.com> wrote:
>
> historically, problematic.  recently - not so much problem for CM's ISDN
> stack.
>
> I'm a bit fuzzy on the details but it was something in Nortel / Avaya to
> allow invoking vendor specific features.
>
> Historically it was problematic for Cisco when the DisplayIE was included
> in codeset6.
>
> /Wes
>
> Scott Voll wrote:
>
> What the hay is " Locking Shift to Codeset 4" in a Q931 debug?
>
> Scott
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070913/55f629e6/attachment.html 


More information about the cisco-voip mailing list