[cisco-voip] Add CUPC to UC 6 Device NameRequired Field problem

[Christian Hennrich]

Hi Wes,
 
you are right, this is the second error I got. You are right! first I
receive your error and after changing, my error.
 
Is there anything stated in the documentation, that one needs to fill in
UPC<MAC>? Propably I missed that.
 
Thanks

________________________________

Von: Wes Sisk [mailto:wsisk at cisco.com] 
Gesendet: Freitag, 14. September 2007 16:54
An: Christian Hennrich
Cc: cisco-voip at puck.nether.net
Betreff: Re: [cisco-voip] Add CUPC to UC 6 Device NameRequired Field
problem


Hi Christian, Is that really all of the error you see?  My lab system
shows:

"Update failed. [491] The specified name has invalid characters or is
not formatted correctly for this device type."

UPC devices must be named UPC<mac>

/Wes


Christian Hennrich wrote: 

	Hi, 
	
	I'm getting the following error, if I try to add a CUPC 
	
	Update failed. [491] TypeDbErrors.INVALID_PRODUCT_NAME 
	
	the name is only 8 chars long CUPCtest. Any other name also
fails. 
	
	anyone had this problem before? 
	
	Thanks in advance
	
________________________________


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070914/33e68037/attachment.html