[cisco-voip] Custom Softkeys?
Louis Marascio (lmarasci)
lmarasci at cisco.com
Fri Sep 14 14:02:14 EDT 2007
Adam,
There is no way to define a custom soft key. This is a long requested
feature, but today the best you'll find is to tie a service URL to a
line button.
Take care,
Louis
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Adam
Sent: Friday, September 14, 2007 12:39 PM
To: Lelio Fulgenzi
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Custom Softkeys?
Yeah I thought about that, but most people just don't like the idle url
very much.
On 9/14/07, Lelio Fulgenzi < lelio at uoguelph.ca
<mailto:lelio at uoguelph.ca> > wrote:
The only way I've found to configure a custom softkey would be
to use an IDLE URL and then program the softkey there.
Not the best answer, but it works. Sorta.
----- Original Message -----
From: Adam <mailto:cisco at adman.net>
To: cisco-voip at puck.nether.net
Sent: Friday, September 14, 2007 11:40 AM
Subject: [cisco-voip] Custom Softkeys?
Is there any way to define custom softkeys? I would like
to have a Helpdsk softkey placed onto the "on hook" screen of every
phone. I know I could configure a speed dial, but it would be much more
efficient to just modify a softkey template and wouldn't take up a line
appearance button on the phone (some phones don't have a button
available).
Thanks,
Adam
________________________________
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070914/29a296c8/attachment.html
More information about the cisco-voip
mailing list