[cisco-voip] Emergency Responder Setup ?

[Scott Voll]

Now....... I love cisco docs.  remember that if your using something like,
oh lets say 4 digits coming into your PRI the the translation would be match
3456 and prefix 913 and have a route point of 913XXXX.

It would be nice is Cisco put a little Note under the 913XXXXXXXXXX.

just my two cents ;-)

Scott


On 9/17/07, VM <vmemaillist at gmail.com> wrote:
>
>
> Yes, that is correct.
>
> On Sep 17, 2007, at 9:55 AM, Dark Fiber wrote:
>
> > I am working on the CER setup finally as I finally got things squared
> > away with my service provider.
> >
> > I am following the CER Admin Guide 1.3(1), on pg. 3-17 Step 3 of
> > "Creating the Translation Patterns for ELINs" the last item is the
> > called party transformations, where it states to enter the digits to
> > prefix to the number that was used when creating the PSAP callback
> > route point.
> >
> > Am I right in assuming they are referring to pg. 3-9 and the
> > 913XXXXXXXXXX  route point?  So I would place just "913"  in this
> > field?
> >
> > So by doing this it would take the incoming call match up the DID and
> > the prefix 913 to it right?
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070917/4392756f/attachment.html