[cisco-voip] CCM 5.1 PAK MAC address
Jason Aarons (US)
jason.aarons at us.didata.com
Wed Sep 19 14:46:15 EDT 2007
Do I use the mac address of the bonded interface from when I did a "set
network failover enable" or do I use the EthX mac address?
On the PAK website do I ever enter the mac address of the subscriber?
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070919/48ebb9aa/attachment.html
More information about the cisco-voip
mailing list