[cisco-voip] CCM 5.1 PAK MAC address

[Justin Steinberg]

my experience is that bonded interface will use the MAC from the
primary eth interface.

On 9/19/07, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>
>
>
> Do I use the mac address of the bonded interface from when I did a "set
> network failover enable" or do I use the EthX mac address?
>
>
>
> On the PAK website do I ever enter the mac address of the subscriber?
>
>
>
>
>
>
> ________________________________
>
>
>
>
>  Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>