[cisco-voip] URGENT -- Blocking/Routing calls based on Caller ID with CCM

Matthew Saskin matt at saskin.net
Thu Sep 20 16:12:10 EDT 2007


Not sure how to do this within CCM natively - if you're running H.323 on 
the gateway you could handle the calls there and pass along to a 
specific DN within callmanager.

-matt

Tim Reimers wrote:
>  
>  
> Blocking/Routing calls based on Caller ID with CCM
>  
> Is there any functionality for this in CCM 4.12 ???
>  
> We do not have IPCC or anything like that, unless there's a 'lite' 
> version inside CCM that I'm not aware of.
>  
> We're receiving bomb threats repeatedly at a highschool, and need to 
> either block or route calls with no Caller ID or with known numbers.
>  
> We could either route the calls to an announce-only mailbox telling 
> people to enable CallerID and call us back, or simply drop the calls.
>  
>  
> Tim Reimers
> Assistant Network Administrator
> Asheville City Schools
> Desk- 828-350-6195 Mobile-828-545-3104
> fax- 828-255-5454
>  
> 
> Most days, there are several fires burning at once. Some days, what's 
> burning is your fire extinguisher.
> To err is human; to truly screw it up requires the root password.
> 
>  
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip



More information about the cisco-voip mailing list