[cisco-voip] CCM and QoS
Fedorov, Konstantin
kfedor at amt.ru
Fri Sep 21 09:38:00 EDT 2007
Hello Jordi,
- Headquarters:
o CCM connected to a 6500 Switch port --> What should I use?
DSCP, because CCM connected to the switch via access port, on which we donn't have L2 cos parameters.
o Service provider Router connected to a 6500 Switch port (Layer 2 connection) --> What should I use?
Depend, if you use trunk between router and switch , you can use cos, but in the policy-map you must correctly set cos values for example set cos dscp
, if access port - dscp.
MGCP Gateways connected to a 6500 Switch port --> What should I use?
See above answer.
o Switch connected through trunk ports --> What should I use?
Any, but I preffer concistency, if you use dscp, why not using it.
o H323 Gateways connected to a 3560 switch port -->What should I use?
Auto voice trust, recognize Cisco devices only, so if h323 Gw Cisco , you can use this.
o Service provider Router connected to a 3560 Switch port (Layer 2 connection) --> What should I use?
Access port - dscp.
By default CCM marks signaling traffic to the 26 ( af31) and media (rtp) 46 (ef)
-----------------------
Sincerely Yours,
Konstantin Fedorov
_____
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jordi Riba (Europe)
Sent: Friday, September 21, 2007 4:16 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM and QoS
Hi All,
I would like anyone to answer these QoS configuration doubts, if it's possible?
I have a Headquarters office and some branch offices:
- Headquarters:
o CCM connected to a 6500 Switch port --> What should I use?
* Mls qos trust cos <-- I'm using this one
* Mls qos trust dscp
o Service provider Router connected to a 6500 Switch port (Layer 2 connection) --> What should I use?
* Mls qos trust cos
* Mls qos trust dscp <-- I'm using this one
o MGCP Gateways connected to a 6500 Switch port --> What should I use?
* Mls qos trust cos <-- I'm using this one
* Mls qos trust dscp
o Switch connected through trunk ports --> What should I use?
* Mls qos trust cos
* Mls qos trust dscp <-- I'm using this one
- Branch Offices:
o H323 Gateways connected to a 3560 switch port -->What should I use?
* I'm using "auto qos voip trust"
o Service provider Router connected to a 3560 Switch port (Layer 2 connection) --> What should I use?
* I'm using "auto qos voip trust" but changing the line "mls qos trust cos" to "mls qos trust dscp"
Does CCM automatically mark signaling traffic to DSCP 24? Should I configure anything on Enterprise Parameters? I think it's not necessary to do anything but I'm not sure...
Any help will be appreciated.
Thanks,
Jordi Riba
IT / Systems Engineer
Dimension Data España
Tel: +34 93 467 08 10 Ext: 825
Mov: +34 660 089 360
Fax: +34 93 487 91 71
jordi.riba at eu.didata.com <mailto:jordi.riba at eu.didata.com>
BARCELONA, C/ Agricultura 106 planta 1. 08019 Barcelona
For further information about Dimension Data, please go to www.dimensiondata.com <http://www.dimensiondata.com/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070921/912643af/attachment-0001.html
More information about the cisco-voip
mailing list