[cisco-voip] Deny new incoming PRI calls on AS5350XM

[Kristian Kielhofner]

On 9/21/07, Wes Sisk <wsisk at cisco.com> wrote:
>
> http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps5207/products_command_reference_chapter09186a00801a7e98.html#wp1213513
>
>
> isdn service
>
> To take an individual B channel or an entire PRI interface out of service or
> set it to a different channel service state that is passed to a
> time-division multiplexing (TDM) switch at the Public Switched Telephone
> Network (PSTN), use the isdn service command in interface configuration
> mode. To remove the configuration, use the no form of the command.
>
> isdn service [dsl number | nfas-int number] b_channel number {state {0 | 1 |
> 2} [hard | immediate | soft]}
>
>
> /wes
>

Wes,

  Thanks a lot - worked like a charm!


-- 
Kristian Kielhofner