[cisco-voip] "Number Not Configured" when AbbrDial pressed

[Paul Choi]

That's the problem. I added them through the CCMuser
pages after subscribing the user to the service. :(
Sorry I wasn't clear about that bit.

--- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Abbreviated dial refers to the speed dials
> configured for the phone either 
> through CCMadmin or CCMuser pages.
> 
> It's about as intuitive as not having forwarding for
> secondary lines. ;)
> 
> 
> ----- Original Message ----- 
> From: "Paul Choi" <asobihoudai at yahoo.com>
> To: <cisco-voip at puck.nether.net>
> Sent: Monday, September 24, 2007 10:04 PM
> Subject: [cisco-voip] "Number Not Configured" when
> AbbrDial pressed
> 
> 
> > CCM 4.1(3)sr3b
> >
> > I setup IP phone services for a user and now when
> I
> > try to use fastdials, it tells me "Number Not
> > Configured" when I use the AbbrDial softkey as if
> I
> > never configured a phone number for the fastdial
> > entry. How do I fix this? Any hints most
> appreciated.
> >
> > Paul
> >
> >
> > 
> >
>
____________________________________________________________________________________
> > Shape Yahoo! in your own image.  Join our Network
> Research Panel today! 
> >
>
http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> > 
> 
> 



       
____________________________________________________________________________________
Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469