[cisco-voip] "Number Not Configured" when AbbrDial pressed
Paul Choi
asobihoudai at yahoo.com
Mon Sep 24 23:19:04 EDT 2007
Lelio, you're right. I just haven't configured these
in a while. :( Thanks a lot for your help.
Paul
--- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> take a look at this doc...it talks about address
> book, fast dial and speed
> dial.
>
> speed dial is what you want.
>
> http://tns.csusb.edu/pdf/CCMUSER.pdf
>
> ----- Original Message -----
> From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> To: "Paul Choi" <asobihoudai at yahoo.com>;
> <cisco-voip at puck.nether.net>
> Sent: Monday, September 24, 2007 10:59 PM
> Subject: Re: [cisco-voip] "Number Not Configured"
> when AbbrDial pressed
>
>
> > FastDials and SpeedDials are two different things
> though. If you are
> > populating FastDials through CCMuser pages, you're
> not going to be able to
> > AbbrDial them. You have to populate SpeedDials.
> When you get to the
> > SpeedDial page, it's the one with 99 of them.
> >
> > ----- Original Message -----
> > From: "Paul Choi" <asobihoudai at yahoo.com>
> > To: "Lelio Fulgenzi" <lelio at uoguelph.ca>;
> <cisco-voip at puck.nether.net>
> > Sent: Monday, September 24, 2007 10:12 PM
> > Subject: Re: [cisco-voip] "Number Not Configured"
> when AbbrDial pressed
> >
> >
> >> That's the problem. I added them through the
> CCMuser
> >> pages after subscribing the user to the service.
> :(
> >> Sorry I wasn't clear about that bit.
> >>
> >> --- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> >>
> >>> Abbreviated dial refers to the speed dials
> >>> configured for the phone either
> >>> through CCMadmin or CCMuser pages.
> >>>
> >>> It's about as intuitive as not having forwarding
> for
> >>> secondary lines. ;)
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: "Paul Choi" <asobihoudai at yahoo.com>
> >>> To: <cisco-voip at puck.nether.net>
> >>> Sent: Monday, September 24, 2007 10:04 PM
> >>> Subject: [cisco-voip] "Number Not Configured"
> when
> >>> AbbrDial pressed
> >>>
> >>>
> >>> > CCM 4.1(3)sr3b
> >>> >
> >>> > I setup IP phone services for a user and now
> when
> >>> I
> >>> > try to use fastdials, it tells me "Number Not
> >>> > Configured" when I use the AbbrDial softkey as
> if
> >>> I
> >>> > never configured a phone number for the
> fastdial
> >>> > entry. How do I fix this? Any hints most
> >>> appreciated.
> >>> >
> >>> > Paul
> >>> >
> >>> >
> >>> >
> >>> >
> >>>
> >>
>
____________________________________________________________________________________
> >>> > Shape Yahoo! in your own image. Join our
> Network
> >>> Research Panel today!
> >>> >
> >>>
> >>
>
http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7
> >>> >
> >>> >
> >>> >
> _______________________________________________
> >>> > cisco-voip mailing list
> >>> > cisco-voip at puck.nether.net
> >>> >
> >>>
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>> >
> >>>
> >>>
> >>
> >>
> >>
> >>
> >>
>
____________________________________________________________________________________
> >> Be a better Globetrotter. Get better travel
> answers from someone who
> >> knows. Yahoo! Answers - Check it out.
> >>
>
http://answers.yahoo.com/dir/?link=list&sid=396545469
> >>
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
____________________________________________________________________________________
Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow
More information about the cisco-voip
mailing list