[cisco-voip] DTMF with MGCP to CallManager/UCCX 4-5

[Jason Aarons (US)]

I have a menu option in a new script under UCCX 4.5.  When I press any
menu option such as 1 or 2 or etc  I get "Please try again" from UCCX,
like it doesn't understand my dtmf tones? I did flash the input
buffer...

 

I know with Unity it requires dtmf alphanumeric, what does UCCX require?
Our Unity Connection 2.0 is working fine with DTMF, just UCCX 4-5
doesn't recognize the prompts.

 

 

Show run | begin mgcp

mgcp

mgcp call-agent 172.16.8.21 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode cisco

no mgcp timer receive-rtcp

mgcp bind control source-interface GigabitEthernet0/0

mgcp bind media source-interface GigabitEthernet0/0

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070928/a6e226c7/attachment.html