[cisco-voip] Convert SIP ATA back to SCCP

[Jonathan Charles]

It may have come from Vonage, in which case it is locked.


Jonathan

On Wed, Apr 2, 2008 at 11:12 PM, Adam <cisco at adman.net> wrote:
> The load on the CCM is already set to SCCP. This ATA has not been registered
> to CCM - the customer is not sure where it came from or why it has a SIP
> load.
>
> -Adam
>
>
>
> On Wed, Apr 2, 2008 at 10:19 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> > Just change the load on CCM to SCCP and then point the ATA to the CCM
> > Publisher...
> >
> >
> >
> > Jonathan
> >
> >
> >
> >
> > On Wed, Apr 2, 2008 at 9:45 PM, Adam <cisco at adman.net> wrote:
> > > Anyone have a link to a document that describes this process? I can't
> find
> > > details on how to move from SIP back to SCCP.
> > >
> > > Thanks,
> > > Adam
> > >
> > > _______________________________________________
> > >  cisco-voip mailing list
> > >  cisco-voip at puck.nether.net
> > >  https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> > >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>