[cisco-voip] silly qs: change pri time slot

[Ruben Montes (Europe)]

Hello,

 

I had the same problem once, and I had almost to unconfigure the whole
router before I can change the number of time slots: it was always
complaining for something: pri, voice ports, dial-peers, etc 

 

Regards,

 

Ruben

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Syed Khalid Ali
Sent: jueves, 03 de abril de 2008 9:53
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] silly qs: change pri time slot

 

hi

 

previously we had a 32 channel dsp card. we had one pri and a four port
fxo card. when i configured the pri group time slots it told me that
maximum can be 28 as enough dsp resources not available. 

 

recently we installed another pri and another dsp but i tried to change
the time slot to 31 on first pri it told me to shutdown the voice
interface card.

 

I tried shutting down the controller as well as the logical serial
interface but in vain. below is the configration script:

 

network-clock-participate wic 1 
!

controller E1 0/1/0
 shutdown
 framing NO-CRC4 
 pri-group timeslots 1-28  <-- need to change to 31
!
controller E1 0/1/1
 framing NO-CRC4 
 pri-group timeslots 1-31
!

interface Serial0/1/0:15
 no ip address
 isdn switch-type primary-net5
 isdn incoming-voice voice
 no cdp enable

!
interface Serial0/1/1:15
 no ip address
 isdn switch-type primary-net5
 isdn incoming-voice voice
 no cdp enable

 

 

Regards,

 

Syed Khalid Ali

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080403/a80b1063/attachment.html