[cisco-voip] silly qs: change pri time slot

[Jonathan Charles]

Also no out the existing controller pri-group timeslots command



Jonathan

On Thu, Apr 3, 2008 at 7:30 AM, Daniel Rodriguez <drodriguez at fidelus.com> wrote:
>
>
>
>
> Shutdown the voice-port for your PRI.
>
>
>
> conf t
>
> voice-port 0/1/0:15
>
> shut
>
>
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Syed Khalid Ali
>  Sent: Thursday, April 03, 2008 3:53 AM
>
>  To: cisco-voip at puck.nether.net
>  Subject: [cisco-voip] silly qs: change pri time slot
>
>
>
>
>
>
> hi
>
>
>
>
>
> previously we had a 32 channel dsp card. we had one pri and a four port fxo
> card. when i configured the pri group time slots it told me that maximum can
> be 28 as enough dsp resources not available.
>
>
>
>
>
> recently we installed another pri and another dsp but i tried to change the
> time slot to 31 on first pri it told me to shutdown the voice interface
> card.
>
>
>
>
>
> I tried shutting down the controller as well as the logical serial interface
> but in vain. below is the configration script:
>
>
>
>
>
> network-clock-participate wic 1
>  !
>
>
> controller E1 0/1/0
>   shutdown
>   framing NO-CRC4
>   pri-group timeslots 1-28  <-- need to change to 31
>  !
>  controller E1 0/1/1
>   framing NO-CRC4
>   pri-group timeslots 1-31
>  !
>
>
> interface Serial0/1/0:15
>   no ip address
>   isdn switch-type primary-net5
>   isdn incoming-voice voice
>   no cdp enable
>
>
> !
>  interface Serial0/1/1:15
>   no ip address
>   isdn switch-type primary-net5
>   isdn incoming-voice voice
>   no cdp enable
>
>
>
>
>
>
>
>
> Regards,
>
>
>
>
>
> Syed Khalid Ali
>
>
>
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>