[cisco-voip] 7970 won't get new code...

[Jonathan Charles]

OK, this is too much work... why isn't the phone getting the new code?


Jonathan

On Fri, Apr 4, 2008 at 5:14 PM, Robert Kulagowski <rkulagow at gmail.com> wrote:
> Jonathan Charles wrote:
>
> > The oldest SCCP 7970 load is SCCP70.8-2-2SRS2s and I tried that...
> >
> > I cannot id any older load...
> >
>
>  You could do this incrementally if you don't want to mess with your live
> config on CM.  If you have a router and a switch that you can isolate from
> the rest of your network, you could put the router into "CME" mode
> temporarily and load it up with the old phone loads from CCO, then have the
> phones load intermediate firmwares off of that until they can bootstrap
> themselves to 8.3.3 that you're running in production.
>
>  Let me know if you need an example CME config.
>