[cisco-voip] 7970 won't get new code...

[Jonathan Charles]

Crap.

Ok, fine... can I get 7.0(3) on a CCM 5.1?



Jonathan

On Fri, Apr 4, 2008 at 6:25 PM, Pat Hayes <pat-cv at wcyv.com> wrote:
> You  might consider consulting the readme for 8.3.4sr1, the first note in
> the upgrade caveat section is:
>
>  "If you are currently running firmware earlier than 6.0(2) on a Cisco
> Unified IP Phone 7970G or 7971G-GE and want to upgrade to 8.0(x), you must
> first install an intervening 7.0(x) load to prevent upgrade failure. Cisco
> recommends using the most recent 7.0(3) load as the
>  intervening load to avoid lengthy upgrade times (see next item)."
>
>
>  -------- Original Message  --------
>  From: "Jonathan Charles" <jonvoip at gmail.com>
>  To: "Robert Kulagowski" <rkulagow at gmail.com>
>  Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
>  Subject: [cisco-voip] 7970 won't get new code...
>
>  Date: 4/4/2008 6:30 PM
>
>
> >
> >
> >
> > OK, this is too much work... why isn't the phone getting the new code?
> >
> >
> > Jonathan
> >
> > On Fri, Apr 4, 2008 at 5:14 PM, Robert Kulagowski <rkulagow at gmail.com>
> wrote:
> >
> > > Jonathan Charles wrote:
> > >
> > >
> > > > The oldest SCCP 7970 load is SCCP70.8-2-2SRS2s and I tried that...
> > > >
> > > > I cannot id any older load...
> > > >
> > > >
> > >  You could do this incrementally if you don't want to mess with your
> live
> > > config on CM.  If you have a router and a switch that you can isolate
> from
> > > the rest of your network, you could put the router into "CME" mode
> > > temporarily and load it up with the old phone loads from CCO, then have
> the
> > > phones load intermediate firmwares off of that until they can bootstrap
> > > themselves to 8.3.3 that you're running in production.
> > >
> > >  Let me know if you need an example CME config.
> > >
> > >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>