[cisco-voip] Subsciber refusing to join cluster

[Jonathan Charles]

Add a hosts entry on both to each other.


Jonathan

On Sun, Apr 6, 2008 at 5:06 AM, Louis Koekemoer (ZA)
<Louis.Koekemoer at za.didata.com> wrote:
>
>
>
>
> I need help on adding a subscriber server to a cluster. I did create the
> subscriber on the Publisher, and after some time installing subscriber, at
> the point of joining to Publisher I get the following message "The
> configuration validation with ZAMDH06056 (xxx.xxx.xxx.xxx.) failed. The
> server could not send /receive UDP packets to the Publisher on port 8500. Is
> network connection to ZADMH06056 up? Is the MTU size correct for this
> network? Does the network allow packet fragments?" We can ping this server
> from the voice VLAN, and I can ping Subscriber IP from Publisher, so we
> don't think we have network connectivity issues here.
>
>
>
> Kind Regards
>
>
>
> Louis
>
>
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>