[cisco-voip] prevent IP Phone from up/downgrading FW in LAB when changing CallManagers

[Jonathan Charles]

Well, at the device level, it should be blank... so, yeah...


Jonathan

On Sun, Apr 6, 2008 at 11:05 AM, CIPS <cisco at cips.nl> wrote:
> Jonathan,
>
>  Thanx for the quick reply. Do you, by any change, know if this will also
>  work for the device load on the device level?
>
>  Thanx.
>
>
>
>  -----Original Message-----
>  From: Jonathan Charles [mailto:jonvoip at gmail.com]
>  Sent: zondag 6 april 2008 17:59
>  To: CIPS
>  Cc: cisco-voip at puck.nether.net
>  Subject: Re: [cisco-voip] prevent IP Phone from up/downgrading FW in LAB
>  when changing CallManagers
>
>  Enter a bogus firmware filename in Device Defaults
>
>
>
>  Jonathan
>
>  On Sun, Apr 6, 2008 at 10:52 AM, CIPS <cisco at cips.nl> wrote:
>  > How can I prevent an IP Phone to download a new FW every time I connect it
>  >  to a different CCM?
>  >
>  >  I have a LAB with 4 different IP Phones and one HW platform with CCM 5
>  and 6
>  >  VMWare images.
>  >  Every time I change the CCM from 5 to 6 or the other way around the IP
>  >  Phones download new FW to do an upgrade or downgrade.
>  >  Is there a simple way I can turn this off?
>  >
>  >  I know of separate TFTP which is shared between CCM's, I also know of
>  >  keeping the FW the same on both Servers.
>  >  But isn't there an easier way? Service param somewhere maybe?
>  >
>  >  Thanks in advance.
>  >
>  >  C.
>  >
>  >  _______________________________________________
>  >  cisco-voip mailing list
>  >  cisco-voip at puck.nether.net
>  >  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >
>
>