[cisco-voip] OT Cisco 2801 ...hot pluggable?

[Nick Griffin]

While I wouldn't recommend it, I've seen people install them hot. The card
will simply not show up until the reboot. So, in short no OIR is not
supported.

On Mon, Apr 7, 2008 at 8:14 AM, Matthew Saskin <matt at saskin.net> wrote:

> As far as I recall, none of the ISR's support OIR (online insertion and
> removal).  Need to have a 7200 or other chassis device to support it,
> and even then, its sketchy at best on the 7200's.
>
> -matt
>
> Todd Simons wrote:
> > Hello All
> >
> >
> >
> > I know this is off topic, just looking for a quick yes/no...  I need to
> > add a WIC to my Cisco 2801, does anyone know if the slots are hot
> > swappable, or do I need to shut down my router?
> >
> >
> >
> > Thanks~
> >
> >
> > ## Scanned by Delphi Technology, Inc. ##
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080407/ba6c8eca/attachment.html