[cisco-voip] change "your current options" on 7911/7905/7906/7912

[Ryan Ratliff]

With CME this is a very simple message to change.  With CCM it is  
not, at least not without finding out where the source of this  
message is and changing it there.  I'm fairly confident it's not hard  
coded.

-Ryan

On Apr 7, 2008, at 9:49 AM, Lelio Fulgenzi wrote:

Are you sure they were using CallManager and not CME? I've seen some  
fancy things on CME like being able to put text on the top line of  
the phone for department name and stuff.

------------------------------------------------------------------------ 
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt
----- Original Message -----
From: Frazee, Timothy
To: Lelio Fulgenzi ; cisco-voip at puck.nether.net
Sent: Monday, April 07, 2008 2:34 AM
Subject: RE: [cisco-voip] change "your current options" on  
7911/7905/7906/7912

I have seen this done at Cabella’s. (outdoor sporting good store in  
the US)







From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
Sent: Monday, April 07, 2008 11:08 AM
To: Frazee, Timothy; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] change "your current options" on  
7911/7905/7906/7912



I opened a TAC case about this and after some 'unofficial' support  
the engineer and his colleagues were not able to get this to work.



------------------------------------------------------------------------ 
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

----- Original Message -----

From: Frazee, Timothy

To: cisco-voip at puck.nether.net

Sent: Saturday, April 05, 2008 8:17 PM

Subject: [cisco-voip] change "your current options" on  
7911/7905/7906/7912



All,



I know how to and have been successful on changing the “your current  
options” for 7940/7960 at a 4.2.3 install.



How can I make this “customization” tweak show up on the 791x and  
790x phones. (minus the 7902 of course)









Timothy Frazee

Network Solutions

Automatic Data Processing, Inc.

This message and any attachments are intended only for the use of the  
addressee and may contain information that is privileged and  
confidential. If the reader of the message is not the intended  
recipient or an authorized representative of the intended recipient,  
you are hereby notified that any dissemination of this communication  
is strictly prohibited. If you have received this communication in  
error, please notify us immediately by e-mail and delete the message  
and any attachments from your system.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


This message and any attachments are intended only for the use of the  
addressee and may contain information that is privileged and  
confidential. If the reader of the message is not the intended  
recipient or an authorized representative of the intended recipient,  
you are hereby notified that any dissemination of this communication  
is strictly prohibited. If you have received this communication in  
error, please notify us immediately by e-mail and delete the message  
and any attachments from your system.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080407/7ceaa1d5/attachment.html