[cisco-voip] power supply for ip phone

[Jorge L. Rodriguez Aguila]

Do you plan to use the POE injector or the actual powercube plug. Depending on the phone you might not be able to connect the connector onto the phone. Some of the newer phones have kind of a lip around the Connector socket which force you to use Pwr Cube 2 vs Power cube 1 which is identical to the Antenna power connector

Jorge

-----Original Message-----
From: Dan Letkeman [mailto:danletkeman at gmail.com]
Sent: Thursday, April 10, 2008 5:45 PM
To: Jorge L. Rodriguez Aguila; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] power supply for ip phone

I'm looking at powering some 7941's and some 7911's.

The model number on the 1131ag power supply is:

Cisco P/N: 34-1977-04
Model: EADP-18FB B


On Thu, Apr 10, 2008 at 4:02 PM, Jorge L. Rodriguez Aguila
<jorge.rodriguez at netxar.com> wrote:
> The POE from a Wifi Antenna power injector SHOULD power an IP phone as the antennas use more power than most IP phones. What model is the IP Phone?
>
>
>  Jorge Rodríguez Aguila
>  CCNA,CCVP,CRMCS
>  Senior Voice/Data Network Consultant
>  Netxar Technologies
>  jorge.rodriguez at netxar.com
>  Office 787-765-0058
>  PCS 787-688-8530
>
>
>
>
>
>
>  -----Original Message-----
>  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dan Letkeman
>  Sent: Thursday, April 10, 2008 4:40 PM
>  To: cisco-voip at puck.nether.net
>  Subject: [cisco-voip] power supply for ip phone
>
>  Hello,
>
>  Does anyone know if the power supply from an 1131ag is the same power
>  supply that powers an IP phone?
>
>  Thanks,
>  Dan.
>  _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>