[cisco-voip] Unity 5.0 with failover - Primary server message playback delay

[Pat Hayes]

You're saying that when the failover is active, there is no delay? Check 
your DNS settings, I've seen similar behavior when one node was pointing 
to a non-AD DNS server. Verify that both have the same DNS config and 
that they are pointing to a DC that is in the same AD. Outside of 
that...there's no firewalls or ACLs between the primary and exchange, 
are there?

-------- Original Message  --------
From: Mike Lydick <mikelydick at yahoo.com>
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity 5.0 with failover - Primary server message 
playback delay
Date: 4/11/2008 2:52 PM

> Has anyone had issue with a Primary server introducing a ~20 sec delay 
> on subscriber message playback delay (silence). This occurs only when 
> Primary is active. The message eventually plays after a consistent 20sec 
> delay. Failover to Secondary, same message plays straight away.
> 
> These servers have 2 UCM cluster integrated.
> Exchange is on second server. (Voicemail only)
> I have checked the switch configuration and all appears to be set correctly.
> 
> some traces:
> 
> 02024: 20:15:29:170 (AvDiagnostics_MC,2068,MiuMethods,14) [Thread 6524] 
> [Port 1] [5318E9FA14CB4D1089E46C3D8D5542D3] [Thread 0x0000197C] [Port 1] 
> Trace MiuLine: Method CAvTSPAbstraction::ConvertToDeviceVolume(DWORD | 
> DWORD* | bool) exited with success (0x00000000).
> 
>  
> 
> 02025: 20:15:51:717 (AvDiagnostics_MC,2134,MiuGeneral,16) [Thread 6524] 
> [Port 1] [5318E9FA14CB4D1089E46C3D8D5542D3] [Thread 0x0000197C] [Port 1] 
> Method CAvMiuWave::Play() beginning WaitFor(WavStopped or StopRequested).
> 
> 
>  
> MAL
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip