[cisco-voip] CUCM Location question

[Matthew Saskin]

Location-based CAC uses a fixed amount of bandwidth based on protocol.  
24kbps for G.729 and 80kbps for G.711 iirc.  If you're seeing bandwidth 
being used without any calls in progress, I'd suggest doing a resync for 
that location (resync button is on the location page in ccmadmin).

Erick Bergquist wrote:
> Does signalling traffic count toward location bandwidth?
>
> Have a setup where a site has audio bandwidth set to 1544, and when
> there are no phone calls active, it is using 39 bandwidth for
> CallsInProgress object under Locations in RTMT.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>