[cisco-voip] DMA File Validation Failed

[Jonathan Charles]

When you ran DMA on the 4.1(3) server, did Validation succeed?



Jonathan

On Tue, Apr 15, 2008 at 7:51 AM, Louis Koekemoer (ZA)
<Louis.Koekemoer at za.didata.com> wrote:
>
>
>
>
> I'm busy upgrading a CallManager 4.1(3) cluster to 6.0. Ran DMA, and got the
> TAR file. I install UC6.0, and when I get to the point where it pulls the
> .tar file from my SFTP server, straight after, it gives me an error "DMA
> File Validation failed: No DMABackupInfo.inf file was found". I have opened
> the .tar file with winzip, and the file is there. I even opened the file,
> and it gives me all my network details, and I have made sure that this is
> all the info I used when I build the new server. Any ideas?
>
>
>
> Kind regards
>
>
>
> Louis
>
>
>
>
>
>
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>