[cisco-voip] DMA File Validation Failed

[Jonathan Charles]

That failed like the big dog...

[08:11:34 AM]   [Warning] This can take a long time, depending on the
size of the directories. Be patient.
[08:11:37 AM]   [Error]	Failure: Error: IO::Socket::INET: connect:
Unknown error. ErrorMessage: Error connecting
LDAP=zabrysvpstnpb02port=8404
[08:11:37 AM]   [Error]	Failed to back up exportable format of Cisco
CallManager directories.
[08:11:37 AM]   Backing up international dial plan files.
[08:11:37 AM]   Exportable format of international dial plan files are
backed up successfully.
[08:11:37 AM]   Backing up Cisco CallManager Registry.
[08:11:48 AM]   Exportable format of Cisco CallManager registry backed
up successfully.
[08:11:48 AM]   [Error]	Could not backup Cisco CallManager successfully.
[08:11:48 AM]
[08:11:48 AM]   Beginning CAPF backup from 10.1.14.20.
[08:11:48 AM]   Backing up CAPF data.
[08:11:48 AM]   Exportable format of CAPF data backed up successfully.
[08:11:48 AM]   CAPF data backup is complete.
[08:11:48 AM]
[08:11:48 AM]   [Error]	Archive not built, due to unsuccessful backup.
[08:11:48 AM]
[08:11:48 AM]   [Error]	Backup information file(s) not saved, due to
unsuccessful backup.

Are you AD integrated?



Jonathan


On Tue, Apr 15, 2008 at 9:29 AM, Louis Koekemoer (ZA)
<Louis.Koekemoer at za.didata.com> wrote:
> Find attached my logs for this. If you look right at the bottom, you'll see it says it finished with warnings. I checked the warnings, and it is all about surnames with spaces and hyphen's in them like Du Plessis.
>
>
>  Kind Regards
>
>  Louis Koekemoer
>  Cisco IPT Systems Engineer
>  Dimension Data South Africa
>   +27 11 575 6560
>  +  +27 76 608 7221
>   louis.koekemoer at za.didata.com
>
>
>
>
>  -----Original Message-----
>  From: Jonathan Charles [mailto:jonvoip at gmail.com]
>  Sent: 15 April 2008 03:18 PM
>  To: Louis Koekemoer (ZA)
>  Cc: cisco-voip at puck.nether.net
>  Subject: Re: [cisco-voip] DMA File Validation Failed
>
>  When you ran DMA on the 4.1(3) server, did Validation succeed?
>
>
>
>  Jonathan
>
>  On Tue, Apr 15, 2008 at 7:51 AM, Louis Koekemoer (ZA)
>  <Louis.Koekemoer at za.didata.com> wrote:
>  >
>  >
>  >
>  >
>  > I'm busy upgrading a CallManager 4.1(3) cluster to 6.0. Ran DMA, and got the
>  > TAR file. I install UC6.0, and when I get to the point where it pulls the
>  > .tar file from my SFTP server, straight after, it gives me an error "DMA
>  > File Validation failed: No DMABackupInfo.inf file was found". I have opened
>  > the .tar file with winzip, and the file is there. I even opened the file,
>  > and it gives me all my network details, and I have made sure that this is
>  > all the info I used when I build the new server. Any ideas?
>  >
>  >
>  >
>  > Kind regards
>  >
>  >
>  >
>  > Louis
>  >
>  >
>  >
>  >
>  >
>  >
>  >
>  > This email and all contents are subject to the following disclaimer:
>  >
>  > "http://www.dimensiondata.com/emaildisclaimer.htm"
>  > _______________________________________________
>  >  cisco-voip mailing list
>  >  cisco-voip at puck.nether.net
>  >  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >
>  >
>
>  This email and all contents are subject to the following disclaimer:
>
>  "http://www.dimensiondata.com/emaildisclaimer.htm"
>