[cisco-voip] CCM 6.1 Node Configuration Data for Certificate

[Jonathan Charles]

This info is just for the TLS certificate for the web page... it would
be cool if it matched across nodes, but it doesn't matter, unless you
are securing your phones too...



Jonathan

On Tue, Apr 15, 2008 at 9:54 AM, STEVEN CASPER <SCASPER at mtb.com> wrote:
>
>
> Question about a couple of parameters associated with setting up the
> Certificate Signing Request during the 6.1 upgrade. These are:
>
> Country
> Location
> Organization
> State
> Unit
>
> Does it matter if this info is identical across Call Manager servers or
> should at least one field be unique?
>
> Thanks!
> Steve
>
>
>
>
>
> ************************************
>  This email may contain privileged and/or confidential information that is
> intended solely for the use of the addressee. If you are not the intended
> recipient or entity, you are strictly prohibited from disclosing, copying,
> distributing or using any of the information contained in the transmission.
> If you received this communication in error, please contact the sender
> immediately and destroy the material in its entirety, whether electronic or
> hard copy. This communication may contain nonpublic personal information
> about consumers subject to the restrictions of the Gramm-Leach-Bliley Act
> and the Sarbanes-Oxley Act. You may not directly or indirectly reuse or
> disclose such information for any purpose other than to provide the services
> for which you are receiving the information.
>  There are risks associated with the use of electronic transmission. The
> sender of this information does not control the method of transmittal or
> service providers and assumes no duty or obligation for the security,
> receipt, or third party interception of this transmission.
>  ************************************
>
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>