[cisco-voip] ucm 5.1 to 6.1 upgrade

[Jonathan Charles]

You needed to order the upgrade kit to get the PAK for the license
upgrade, cuz you now need a CCM feature license.

Just put the disc into the DVD drive and point the upgrade to the
drive and go... do the pub first, load your license, then do the
sub...



Jonathan

On Tue, Apr 15, 2008 at 1:04 PM, Eric Pedersen <eric.pedersen at sait.ca> wrote:
>
>
>
>
> I'm confused about the UCM 5.1 to 6.1 upgrade.  The cisco docs I found said
> I need to order a UCM 6.1 DVD for this, which should contain a
> ucm…tar.gz.sgn file.  I ordered an upgrade kit and a box came with the label
> "SW Upgrade CM 5.1/5.1 to 6.1 for Cisco Smartnet?" (not sure why Cisco puts
> a ?).  The DVD inside says "Cisco Unified Communications Manager 6.1,
> Includes CUCM 6.1 (Install and Upgrade from 4.1/4.2)".  Is this going to
> work for 5.1, or was I sent the wrong DVD?  I did not see a tar.gz.sgn file
> on the DVD.
>
>
>
> Thanks,
>
> Eric
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>