[cisco-voip] VMware.

[Peter Smale]

Ok I will give it a try.


-----Original Message-----
From: Jonathan Charles [mailto:jonvoip at gmail.com] 
Sent: Tuesday, April 15, 2008 10:59 AM
To: Frazee, Timothy
Cc: Peter Smale; Joris Arts; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VMware.

No, it isn't.

4.3 runs on WIn2k3


Jonathan

On Tue, Apr 15, 2008 at 12:56 PM, Frazee, Timothy
<Timothy_Frazee at adp.com> wrote:
> Double check, I don't think ccm 4.3 needs windows 2003. You can upgrade
>  a 4.2 to 4.3 without touching the OS. (still 2000 based)
>
>
>  -----Original Message-----
>  From: cisco-voip-bounces at puck.nether.net
>  [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Peter Smale
>
>
> Sent: Tuesday, April 15, 2008 12:52 PM
>  To: 'Jonathan Charles'; 'Joris Arts'
>  Cc: cisco-voip at puck.nether.net
>  Subject: Re: [cisco-voip] VMware.
>
>  Yes think I seed CCM4.3.2 not CCM3.2
>
>
>  -----Original Message-----
>  From: Jonathan Charles [mailto:jonvoip at gmail.com]
>  Sent: Tuesday, April 15, 2008 9:51 AM
>  To: Joris Arts
>  Cc: Peter Smale; cisco-voip at puck.nether.net
>  Subject: Re: [cisco-voip] VMware.
>
>  I presume you mean 4.3 for the WIndows 2003...
>
>
>
>  Jonathan
>
>  On Tue, Apr 15, 2008 at 10:49 AM, Joris Arts <jarts at speechworks.nl>
>  wrote:
>  >
>  >
>  >
>  >
>  > Hi Peter,
>  >
>  >
>  >
>  > You can setup all CCM versions under Vmware (obviously for test
>  purposes,
>  it
>  > is not a supported config). Be aware however for CCM 4.x you would
>  need to
>  > have the proper win2k3 image for an MCS78xx platform.
>  >
>  > Setting up CUCM 5.x and 6.x is easier, since it automatically detects
>  > VMware. You can use VMware 5.x or 6.x workstation or ESX server.
>  >
>  >
>  >
>  > Take at least 2 GB memory, though this might be short for CUCM 6.x.
>  The
>  most
>  > problematic thing when setting up CUCM under VMware is performance,
>  the
>  GUI
>  > tends to get very slow and things like music on hold etc will deliver
>  poor
>  > quality.
>  >
>  >
>  >
>  > I am still struggling with CUCM 6.1 on VMware with a Linux Fedora host
>  > system, and I can't get the performance well, despite 4 GB memory. Any
>  ideas
>  > are welcome.
>  >
>  >
>  >
>  > Cheers,
>  >
>  >
>  >
>  >
>  >
>  >
>  > Joris Arts
>  >
>  > Speechworks Consultancy
>  >
>  > Looiersgracht 78
>  >
>  > 1016VT Amsterdam
>  >
>  > Phone:  +31 (0) 20 6151100
>  >
>  > Mobile: +31 (0)  64 4752889
>  >
>  > www.speechworks.nl
>  >
>  >
>  >
>  >
>  >
>  >  ________________________________
>  >
>  >
>  > From: cisco-voip-bounces at puck.nether.net
>  > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Peter Smale
>  >  Sent: dinsdag 15 april 2008 17:31
>  >  To: cisco-voip at puck.nether.net
>  >  Subject: [cisco-voip] VMware.
>  >
>  >
>  >
>  >
>  >
>  > Can a laptop be set up with CCM4.3.2 under VMware or just CCM5.X and
>  6.X
>  >
>  > If so does anyone have tip's or Config guide.
>  >
>  > I have VMware Workstation  6.3  do I need anything else?
>  >
>  > Thanks Peter.
>  >
>  >
>  > _______________________________________________
>  >  cisco-voip mailing list
>  >  cisco-voip at puck.nether.net
>  >  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >
>  >
>
>  _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>  This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and confidential.
If the reader of the message is not the intended recipient or an authorized
representative of the intended recipient, you are hereby notified that any
dissemination of this communication is strictly prohibited. If you have
received this communication in error, please notify us immediately by e-mail
and delete the message and any attachments from your system.
>